Automatic HF Radio Tuner For use with Icom IC-801E HF Radio
Matches all bands The AT-141 matches any frequency on every HF marine band. For example, the tuner matches a 7 m long-wire antenna across 1.6–30 MHz. Full automatic tuning Just push the [TUNE] switch on the transceiver, and the AT-141 adjusts immediately to the minimum SWR of any frequency on any HF marine band.
- HF operation on any size ship The AT-141 allows you HF operation where antenna element length is restricted due to space.
- Weather resistant The AT-141 is housed in a durable, completely weather resistant ASA case with a rubber basket. The antenna tuner can be conveniently installed both on the deck or in the cabin near the antenna element.
- Simple installation Installation is simple. Just connect the control and antenna cables. You never need to open the cover.
- 45 memories for shorter tuning time To decrease the tune-up time, the AT-141 automatically stores the matching conditions for up to 45 frequencies.
- Re-tuning for a memorized frequency takes approx. 1sec.
- Super capacitor for memory backup even if the AT-141 is not used for approx. 1 week, the built-in super capacitor backs up contents of the 45 memories.
- Low power tune up The AT-141 emits low output power during tuning. This feature reduces the possibility of causing interference to other stations.
- Tuner through function The tuner through function is built into the AT-141. This function helps improve receiver gain, depending on the antenna element length used, and operating frequency
