Sealed Inverter / Charger in 12V/2000W, 24V/2300W and 48V/2300W configurations.
Sealed Inverter-Charger. The OutBack FX series is a modular "building block” sine wave inverter/charger that can be used for both small and large power systems.
Each OutBack FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional FX inverter/chargers can be connected at any time in either parallel or three-phase configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future.
The OutBack FX is designed to survive harsh environments anywhere in the world. Our unique sealed, gasketed die-cast aluminum chassis protects and keeps the power conversion components cool - without requiring outside air to be blown through the sensitive electronics. This reduces the major causes of inverter failure - corrosion, dust, insect and animal damage. The FX can be used in high ambient applications up to 60oC with reduced output ratings. The OutBack FX series inverter/charger system is designed for both residential and commercial stand-alone or back-up power applications with battery energy storage. It is designed to operate as a coordinated system with the other OutBack products i.e. the PSDC, PSAC and PSR enclosures as well as the MX60 MPPT charge controllers and MATE system controller and display.
The "Land Base" E & ET versions have an automatic transfer relay that switches the Active circuit from mains source to inverter source. The Neutral circuit remains connected to the input side which means that the inverter will inherit the MEN connection from the input source. When isolated from the input source (as would be the case when the shore power cord is removed) the MEN connection will be lost. When using this model in mobile applications, always ensure that an alternative means of maintaining an MEN connection is employed if required. We designate this option as "External MEN"
The “Mobile” EM & EMT versions have an automatic transfer relay that switches both Active and Neutral circuits from the mains source to inverter source when mains is not available and the inverter is enabled. An automatic Mains Earth Neutral (MEN connection is made inside the inverter whenever the unit is running in inverter mode. When sourcing mains, the MEN is inherited from the mains source. We designate these models as "Internal MEN".
Models are available in 12 volt / 2000 wattt, 24 volt / 2300 watt and 48 volt / 2300 watt configurations.
