Product Categories
Narrow Selection

By Brand

Voltage

Mount

Gnd

Reg Regulation

Marine Alternators

Engine driven alternators offer the most cost effective battery charging solution. Marine alternators are designed to charge house batteries.

  Saddle Mount 6-Series 12 volt 70 amp Alternator with Single Pulley - Balmar 60-70-SR-IG
  Foot Mount AT-Series 12 volt 165 amp Alternator with Serpentine Pulley - Balmar AT-SF-165-12-IG
  Foot Mount 94-Series 12 volt 165 amp Alternator with Dual Pulley - Balmar 94-165-12-IG
  Saddle Mount 94LY-Series 12 volt 160 amp Alternator with Dual Pulley - Balmar 94LY-165-12-IG
  J180 Mount 95-series 12 volt 165 amp Alternator with Dual Pulley - Balmar 9504-165-12-IG
  J180 Mount 97-series 12 volt 160 amp Brushless Alternator with Dual Pulley - Balmar 9704-160-12-IG-BL
  J180 Mount 97EHD-series 12 volt 185 amp Alternator with Dual Pulley (case gnd) - Balmar 97-EHD-185-12
  J180 Mount 98-series 24 volt 220 amp Brushless Alternator with Dual Pulley - Balmar 98-24-220-IG-BL
  Electromaax Small Case Alternators
  24 volt 150 amp J180 Mount Alternator - Electrodyne GE150-24ER

ELECTROMAAX SMALL CASE ALTERNATORS
Electromaax make a range of small frame alternators to fit all popular marine diesel engines. They are a grounded case design that is suitable for most installations.

  • 12 volt, 100 - 180 amp output Saddle and single foot mounts
  • High output at idle
  • Patented internal regulator
  • Grounded case Ignition
  • Protection for gas or diesel engines
  • Hand wound heavy duty stator and rotor
  • Internal Dual fans for enhanced cooling

BALMAR 6-SERIES ALTERNATORS
Small in size, the light duty 6-Series alternator has mounting configurations to suit almost any engine. Built into the small case 6-Series alternator is a patented single stage Smart Ready internal regulator that’s always ready as a primary regulator, or as a back up in the unlikely event that your external regulator fails.

  • Saddle and single foot mounts.
  • Alternators meet USCG Title 33, ISO J1171, SAE 8846 and international CE standards for ignition protection in gas or diesel engines.
  • Isolated ground.
  • D+ lamp circuit.
  • 12,000 max RPM.
  • 1-year limited warranty. ShWt. 7 KG

BALMAR 94-SERIES ALTERNATORS
Two-inch single foot 94-Series alternators feature oversized bearings and extra high amperage diodes to ensure superior cooling and longer life. Custom stators, integrating larger gauge copper windings deliver outstanding low-end output and impressive performance across the powerband.

  • Bi-directional cooling fan.
  • Isolated ground terminal.
  • Maximum 6,500 RPM.
  • Corrosion-resistant powdercoat.
  • Meets USCG Title 33 standards for ignition protection.
  • 1-year limited warranty. ShWt. 10KG

BALMAR 94LY-SERIES ALTERNATORS
Designed to be compatible with Yanmar’s 6LY3 engine and other engines using a Hitachi-style saddle mount and dual vee belts, 94LY alternators feature custom wound stators, extra heavy diodes ad a clocked case which provides improved access to all terminal connections.

  • Bi-directional cooling fan.
  • Isolated ground terminal.
  • Maximum 6,500 RPM.
  • Corrosion-resistant powdercoat.
  • Meets USCG Title 33 standards for ignition protection.
  • 1-year limited warranty.
  • ShWt. 10KG

BALMAR 95-SERIES ALTERNATORS
Moderately compact for its generous output curves, the 95-Series features an extra heavy duty stator winding with large gauge wire for added output at low RPM. Combine that with extra large sealed bearings, a massive .875” pulley shaft and high amperage diodes for durability and long alternator life. The 95-Series alternator features an isolated ground for sure continuity to system ground, and a brawny J-180 style saddle mount for plenty of resistance to twist and torque.

  • Isolated Ground Terminal
  • Bidirectional cooling fan.
  • 6,500 RPM maximum rotation speed.
  • Corrosion-resistant powdercoat finish.
  • Meets US Coast Guard Title 33 safety standards.
  • Requires external regulation.
  • 1-year limited warranty.
  • ShWt. 10 KG

BALMAR 97-SERIES ALTERNATORS
Built expressly for the demands of large, multi-battery house banks, inverter loads and other above-average electrical demands, extra-large case 97-Series alternators are scaled to deliver impressive output at all engine RPMs. 97-Series alternators are rated at 160 amps at 12 volt, or 110 to 140 amps at 24 volts. Brushless 97-Series models meet US Coast Guard Title 33, CE, ISO J1171 and SAE 8846 safety standards.

  • Isolated Ground Terminal
  • Bidirectional cooling fan.
  • Corrosion-resistant powdercoat finish.
  • 6,500 RPM maximum rotation speed.
  • J180 Mount Brushless Design
  • Maximum RPM: 6,500.
  • ShWt. 18 KG

BALMAR 97EHD-SERIES ALTERNATORS
With even more mass and rated output, 97EHDSeries alternators are designed to support substantial battery and service loads demanded by larger recreational, commercial, or military vessels. 97 EHD-Series alternators are available in 185 and 265-amp models in 12 volts, and 190 amps at 24 volts.

  • Cast aluminum finish.
  • Case ground.
  • All models require external regulation.
  • J-180 mount.
  • 1-year limited warranty.
  • ShWt. 20 KG.

BALMAR 98-SERIES ALTERNATOR
Balmar 98 Series AlternatorAvailable in 310A/12V and 220A/24V models, the 98-Series alternator adds dual fans for enhanced cooling, high amperage diodes for efficient voltage rectification, over-sized shaft and pulley bearings for smoother, quieter operation, and brushless excitation for longer wear, reduced electrical noise and greater ignition protection.

  • Isolated Ground Terminal 
  • Brushless design
  • D+ Lamp Circuit
  • External Regulation
  • Maximum RPM: 6,500
  • Meets USCG Title 33, CE, SAE 8846 and ISO J-1171 standards for ignition protection.
  •  Durable powdercoat finish.
  • 1-year limited warranty.
  • ShWt 21 KG.
Not sure what you need or if it will work? Just a phone call away at (07) 5563 9088.