ePower 24V 30A DC to DC Charger

24V 30A DC to DC Battery charger.

  • Availability:
  • SKU: ENE.EN3DC30-24V
  • Output Volts: 24V
  • output amps: 30A
  • Input Volts: 12/24V
  • Manufacturer: Enerdrive
  • MPN: EN3DC30-24V
  • Shipping Weight: 2.20kg

Free Shipping - On This Product

$498.00 inc GST
$579.00 RRP
SAVE $81.00 (14%)


Insurance
All shipments are covered for loss or damage while in transit up to the point of delivery to the nominated shipping address. Insurance does not cover goods left on your premises under your instruction.

24V 30A DC to DC Battery charger.

Fully automatic, the multistage and multi input Enderdrive DC2DC chargers are robust and feature full  with inbuilt dedicated MPPT Solar Regulators. The ultimate solution when you need to choose to charge from the engine when running or solar panels when stationary in sunny conditions.

Once set, selecting the charge source is fully automatic and controlled from within the unit without the need for external relays. Under normal charging conditions, the ePower DC2DC will do a full charge to float stage on the house battery and you can choose either GEL, AGM, Flooded, Custom Programmable or Lithium, with all the relevant information visible on the LCD display.

Employing three stage charging, once the float stage is reached, the unit will shift to power supply mode to support the on-board DC loads and/or hold a constant and safe permanent charge level. This means the charger can be permanently connected to your battery systems safeguarding the health recommendations of deep cycle batteries.

 

 

THREE STAGE CHARGING

Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.

Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.

Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.

 

(ENE.EN3DC30-24V)

24V 30A DC to DC Battery Charger

Model EN3DC30-24V
Output Rating
Output Voltage 24V Nominal (17.0V min)
Output Current (Maximum) 30A
Output Power 865W
Charger DC Output (CH1):
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range 27.6V – 31.0V
Float Voltage Range 26.0V – 27.6V
Charger Current (User Selectable) 5 / 10 / 20 / 30A (default 30A)
Equalize Voltage (Flooded Battery) 31.0V
Equalize Charging Current 10% of Bulk Current Setting
Charging Control 2 stage / 3 stage selectable (Default 3 Stage)
DC Output Bank Single
Current draw from CH1 when not operating ≤50 mA
Battery Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard)
Efficiency 95%
INPUT Rating (CH2 – MPPT Solar)
Input Voltage 14.5 – 45VOC
Maximum Solar Input ≤23V input, 500W (600W allowable) ≥37.5V-45V input, 800W (1000W allowable)
INPUT Rating (CH3 – Start/Alternator)
Input Voltage 10.5 – 16VDC / 21 – 32VDC
Dimensions
Height x Width x Depth 242mm x 172mm x 74mm
Unit Weight 1.85 Kg
Shipping Weight 2.17 kg

 

Note: Specifications subject to change without notice.

Enquiry Form

Be The First To Review This Product!

Help other Outback Marine Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Blue Sea MRBF Terminal Fuse Block 30-300A

Blue Sea MRBF Terminal Fuse Block 30-300A

BSS.5191

$34.90

8% OFF RRP $38.10
Blue Sea MRBF Fuse Terminal 250A

Blue Sea MRBF Fuse Terminal 250A

BSS.5189

$21.80

Victron  Orion-Tr Smart 12/24-15A (360W) Isolated DC-DC charger
25% OFF RRP $496.00
Victron Orion-Tr Smart 12/24-15A (360W) Non-isolated DC-DC charger
20% OFF RRP $414.00
Victron 75/15 Bluetooth SmartSolar MPPT and 12V 30A DC-DC Non-Isolated Charger Bundle
28% OFF RRP $636.00
Enerdrive ePRO Plus Bluetooth Dongle

Enerdrive ePRO Plus Bluetooth Dongle

ENE.EN5092230

$199.00

More From This Category

Enerdrive DC 2 DC 40+amp Battery Charger/ MPPT Reg EN3DC40+
19% OFF RRP $562.00