24 V DC to 230 V AC Inverter for Mobile and Off-Grid Power Systems

Converts 24 V DC battery power into stable 230 V AC power for operating domestic and electronic equipment in mobile, marine, recreational and off-grid electrical systems. The 24 V configuration delivers 1450 W continuous power at 25°C, 1300 W at 40°C and up to 2100 W peak power for 15 seconds, providing the start-up capacity required by loads such as LED power converters, halogen lamps and electric tools. Full-bridge and toroidal transformer topology provides reliable operation, with protection against short circuits, overload, excessive battery voltage, low battery voltage, high temperature and excessive DC ripple. The VE.Direct communication port enables configuration and monitoring through compatible computers or mobile devices when used with the appropriate interface or Bluetooth Smart dongle. ECO mode reduces standby consumption during low-load conditions, while remote on/off capability and an AU/NZ AS/NZS 3112 AC outlet support practical integration into Australian and New Zealand power systems.

Key Features

• 24 V DC to 230 V AC Conversion: Converts power from a 24 V battery system into 230 V AC for operating compatible domestic and electronic equipment.
• 1450 W Continuous Output: Delivers 1450 W continuous power at 25°C and 1300 W continuous power at 40°C.
• High Start-Up Power: Provides 1600 W time-limited power from a cold start and up to 2100 W peak power for 15 seconds to accommodate demanding start-up loads.
• VE.Direct Connectivity: Supports configuration and monitoring through computers, smartphones and tablets when used with the appropriate VE.Direct interface or Bluetooth Smart dongle.
• Configurable Operating Parameters: Allows adjustment of low-battery alarms, battery cut-off and restart levels, dynamic cut-off, output voltage, frequency and ECO mode settings.
• ECO Mode: Switches to standby when the connected load falls below the configured threshold, helping reduce unnecessary battery consumption.
• Remote On/Off Control: Supports connection of an external remote switch for convenient inverter control from another location.
• Integrated Protection: Provides protection against output short circuit, overload, excessive or insufficient battery voltage, high temperature and excessive DC ripple.
• AU/NZ AC Outlet: Features an AS/NZS 3112 outlet configuration for compatibility with Australian and New Zealand electrical equipment.
• Screw Terminal Battery Connection: Uses screw terminals for the DC battery connection, supporting straightforward installation without specialised termination tools.
• Wide Operating Temperature Range: Operates from -40°C to +65°C with fan-assisted cooling and output derating above 40°C.
• IP21 Protection: Provides IP21 enclosure protection for suitable indoor and protected installation environments.

Delivering substantial AC output from a 24 V battery bank, the inverter provides a practical power conversion solution for vehicles, boats, recreational systems and independent power installations. Its configurable VE.Direct interface, ECO operation and high start-up capability provide flexible control while supporting demanding 230 V AC loads.