Waterproof lithium battery for high-capacity off-grid power systems

Built for large auxiliary power systems requiring substantial energy storage and high discharge capability, this lithium battery combines a rugged IP67-rated enclosure with advanced battery management and integrated monitoring. The waterproof and dust-tight construction supports installation in caravans, motorhomes, 4WDs, marine vessels and off-grid systems, while Bluetooth connectivity, CAN/485 communication and an integrated cell heater provide greater control across demanding operating conditions.

Key Features

  • IP67 protection: Waterproof and dust-tight enclosure withstands temporary immersion in water up to 1 metre for 30 minutes, supporting installation in exposed environments.
  • High discharge capability: Supports 300A continuous load current at 25°C and up to 1000A peak discharge for 5 seconds.
  • Extended cycle life: Delivers 6,000 charge cycles at 80% depth of discharge using Grade-A prismatic cells.
  • Integrated BMS: Continuously monitors individual cells and provides overcharge, over-discharge, short-circuit, thermal and high/low voltage protection.
  • Built-in cell heater: Automatically controlled by the BMS to bring the cells to a suitable operating temperature for charging in freezing conditions.
  • Bluetooth monitoring: Connects to the compatible mobile app for viewing voltage, current, state of charge, temperature, individual cell voltages, cycle history, alarms and diagnostics.
  • CAN/485 communication: Supports real-time monitoring and control through compatible power management systems.
  • Integrated SOC display: LED indicators display state of charge in 25% increments and provide visible fault alerts.
  • On/off control: Built-in switch isolates the battery terminals for storage, maintenance or system shutdown.
  • Reset function: Integrated reset button simplifies restarting the battery following a low-voltage shutdown.
  • Expandable installation: Supports configurations of up to four batteries in series and four batteries in parallel.
  • IEC 62619 certified: Cell and complete battery pack certification verifies compliance with recognised lithium battery safety requirements.
  • Installation hardware included: Supplied with a battery tray and securing straps for installation.
  • 5-year warranty: Covered by a five-year manufacturer warranty.

The combination of large energy storage capacity, substantial discharge capability and environmental protection supports power-intensive electrical systems in mobile, marine and off-grid applications. Integrated communication and monitoring functions provide detailed battery information for ongoing system management.

Nominal Voltage 12V
Capacity 460Ah
IP Rating IP67
Certification IEC 62619
Maximum Load Current 300A @ 25°C
Peak Discharge Current 1000A for 5 seconds
Maximum Charge Current 300A @ 25°C
Nominal Charge Current 150A
Charge Voltage 14.2–14.6V
Standby Float Voltage 13.5–13.6V
Charge Temperature -20°C to 60°C
Discharge Temperature -20°C to 60°C
Low Cell Voltage Disconnect ≤2.80V
High Cell Voltage Disconnect ≥3.75V
Cycle Life 6,000 charge cycles @ 80% DOD
Communication Protocol CAN/485
Communication Port M12-6P
Bluetooth App Yes
Relief Valve Yes
Built-in Heater Yes
On/Off Switch Yes
SOC Indicator Yes
Terminal Type 2 × M8 positive and 2 × M8 negative terminals
Terminal Torque 8–10Nm
Series / Parallel Configuration Up to 4 in series and 4 in parallel
Mounting Tray and straps included
Dimensions 500 (L) × 265 (W) × 245 (H) mm
Weight 44.5kg
Warranty 5 years
SKU ENE.EPL-460BT-12V
Model # EPL-460BT-12V-G3
Brand Enerdrive
Shipping Weight 45.0000kg
Shipping Width 0.500m
Shipping Height 0.324m
Shipping Length 0.265m
Shipping Cubic 0.042930000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Outback Marine Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Related products