CAN-Bus BMS Communication Cable for Third-Party Battery Integration

The Victron VE.Can to CAN-bus BMS Type B Cable 1.8 m connects compatible third-party CAN-bus enabled batteries to a Victron GX system. The CAN-bus BMS end connects to the battery, while the VE.Can end connects to the VE.Can or BMS-Can port of a compatible GX device, allowing battery management data to be communicated to the Victron system. Type B wiring is intended for specific supported battery brands and configurations, making correct cable selection important when integrating third-party batteries with Victron monitoring and control equipment.

Key Features

• Third-Party Battery Integration: Connects compatible CAN-bus enabled batteries to Victron GX devices for BMS communication.
• Type B Configuration: Uses the Type B CAN-bus pin configuration required by specific supported battery systems.
• GX Device Connection: Connects to a compatible VE.Can or BMS-Can port on a Victron GX device.
• Battery BMS Connection: Dedicated CAN-bus BMS end connects directly to the compatible battery communication interface.
• Supported Battery Systems: Compatible with selected battery systems from AXIstorage, BMZ, BSLBATT, LG Chem, Pylontech, Solar MD and Freedom Won.
• System Monitoring Integration: Enables compatible battery BMS information to be communicated through the connected Victron GX system.
• Purpose-Built Wiring: Provides the required CAN-H, CAN-L and ground pin configuration between the Victron system and compatible battery BMS.
• Pre-Assembled Cable: Factory-assembled cable simplifies installation compared with creating a custom CAN-bus communication cable.

Facilitating communication between compatible third-party batteries and Victron GX equipment, the cable provides the required Type B wiring configuration for supported BMS installations. Correct battery compatibility and GX device configuration should be confirmed before installation.