The Traveller

Enerdrives compact power solution to operate all of the electrical equipment that is ending up in the back of 4WD canopies these days from  From a simple system to operate a fridge and a couple of lights to a full on power station.
 

This Traveller is designed for the end user requiring DC2DC and AC charging ability in a neat package. The Traveller system consists of the following items

• Enerdrive ePOWER DC2DC40+ Vehicle/Solar Charger
• Enerdrive ePOWER 40A AC charger
• 1 x ePRO Plus Battery Monitor
• 4x Pre-wired Circuit Breakers for main power equipment
• 4 x Contura switches for Lights & Auxiliary loads
• Pre-wired Battery & Fridge Anderson Plugs
• Fitted with 1x 12V Output Socket and 1x Twin USB 2.4A Hi Amp sockets. Let us know if you wish for this to be changed to suit your requirements.
• Battery Reset button for kick starting your flat battery from the DC2DC Charger
   

All systems are pre-wired by Enerdrive where possible so the only cabling required at installation time is load outputs, battery connection, & vehicle/solar/tank inputs.

All systems are built into a unique compact box arrangement and designed to mount on either the front or rear bulkheads of the vehicles canopy. The systems are available in either passenger side or drivers side installation. Any brand of battery is suitable from Wet Sealed, AGM, Gel and Lithium.
 

The canopy Systems are built to order. Please allow at least 2-4 weeks for Enerdrive to build your system.