Following on from the great success of the Enerdrive Power System Series comes a new addition to the range. The Wanderer is built using the same proven quality as the rest of the range. Built to survive the rugged Aussie conditions and designed to suit the needs of installers and end-users looking for a reliable power system solution.

The components of the system are pre-wired in house by Enerdrive to make installation even easier. The Power System Series are neatly packaged onto a pre-assembled board with the main connections housed within a rugged metal case.

The Wanderer:

Via intelligent use of the Inverter/Charger Combi, The Wanderer is able to provide a more compact solution compared to The Adventurer. Available in 2 different versions;

K-WANDERER-R Driver’s side version
K-WANDERER-L Passenger’s side version

The Wanderer consists of the following items:

• Enerdrive ePOWER DC2DC40+ Vehicle/Solar Charger
• Enerdrive 12V 1600W/60A Inverter/Charger Combi
• High quality HD Reset circuit breakers for Loads, DC2DC and Inverter/Charger
• 4 x ‘Push to Reset’ breakers for minor loads
• 4 x Carling Switches
• Your choice of Twin USB 2.4A Hi Amp sockets to charge your mobile devices or mix it up with a 12v Output Socket
• Simarine LCD Battery WIFI Monitoring System with the option to incorporate individual load/charge information
• Comes supplied with black CMS 15A inlet with RCD protection along with 5m inlet cable
• Combi Unit installed with 1.5m of 50mm2 positive and negative cables to ensure you have all the necessities for the install

All Wanderer systems are pre-wired by Enerdrive so the only cabling required at installation time is load outputs, battery connection & vehicle/solar/tank inputs.

All systems are built into a unique compact box arrangement and designed to mount for example on either the front or rear bulkhead of a vehicle canopy. The systems are available in either Left (passenger side) or Right (drivers side) installation. Any type of battery is suitable from Wet Sealed, AGM, Gel and Lithium.

If you are interested in having custom engraving for switch/circuit breakers to your specific requirements, this option is available at an additional cost.